What Grade 1, S16/S18, 12.5% moisture and black & broken limits really mean when you buy Vietnamese green coffee.
When sourcing green coffee from Vietnam, the specification sheet (spec sheet) is your primary roadmap. However, terminology like “Screen 18,” “12.5% max moisture,” or specific defect counts can sometimes look like a maze of numbers. Understanding how to read these metrics ensures you get exactly what you pay for and helps you dial in your roast profile before the beans even hit the machine.
Here is a practical breakdown of how to read and interpret a Vietnamese green coffee specification sheet.
1. What “Grade” means in Vietnamese export coffee
In Vietnamese coffee export standards, “Grade” (such as Grade 1 or Grade 2) primarily reflects the quality grading based on defect tolerances, foreign matter limits, and bean uniformity rather than just flavor score.
-
Grade 1: Represents the highest commercial standard, with strict limits on black beans, broken beans, foreign matter, and moisture. It ensures a clean, stable run in production.
-
Lower Grades (Grade 2, 3, 4): Allow higher percentages of defects or wider screen variations, typically used for commercial bulk blends or instant coffee production where cost efficiency is prioritized over uniformity.
2. Screen sizes S13, S16, S18 (hole diameter in 1/64 inch)
Screen size measures the physical physical dimensions of the green bean by passing them through perforated metal screens. The numbers correspond to the diameter of the holes measured in 1/64 of an inch:
-
Screen 13 (S13): ~5.16 mm (smaller beans, often used for peaberries or specific local grades).
-
Screen 16 (S16): ~6.35 mm (medium-large size, very common for standard commercial robusta).
-
Screen 18 (S18): ~7.14 mm (large bean size, highly sought after for premium single-origin or specialty robusta lines requiring even heat transfer during roasting).
3. Why moisture is kept at 12.5–13%
Moisture content is one of the most critical parameters for green coffee storage and shipping stability.
-
The Sweet Spot: Vietnamese green coffee is typically standardized at 12.5% to 13% maximum moisture.
-
Why it matters: If moisture is too high (>13%), the beans are prone to mold growth, fungal development, and accelerated aging during sea freight. If it is too low (<11%), the coffee can dry out, losing its lively aromatics and causing uneven development during roasting. Maintaining 12.5% ensures optimal water activity balance for stable shelf life.
4. Impurities, black and broken beans
Defect classification dictates how clean your batch is and directly influences cup clarity:
-
Impurities: Refers to foreign matter such as sticks, stones, dirt, or coffee parchment. Premium export grades usually cap impurities at 0.1%.
-
Black & Broken Beans: Black beans are over-fermented or dead beans that introduce harsh, medicinal, or rubbery off-flavors. Broken beans expose surface area to rapid oxidation and can scorch easily in the roaster. Strict spec sheets limit these defects to low percentages (e.g., 0.3% to 0.5%) to maintain a clean cup profile.
5. Screen retention percentage
Seeing a metric like Retention ≥90% on a spec sheet means that at least 90% of the coffee batch successfully sits on or passes through the designated screen size sieve without falling through to smaller sizes. High retention percentages (90% or higher) indicate excellent bean size uniformity, which is essential for a consistent, even roast without under-developed small beans or over-roasted large beans.
6. Example: reading our Robusta Dry Processed Grade 1 specification
Let’s put it all together by looking at a real line item from our export spec sheet for Robusta Dry Processed Grade 1:
-
Grade: Grade 1 (Top commercial export tier).
-
Moisture: 12.5–13% max (Optimized for stable shipping and storage without mold risk).
-
Impurities: 0.1–0.5% max (Extremely clean, minimal foreign matter).
-
Black & broken / Defects: Black & broken 0.3% (Low defect count ensuring clean cup flavors).
-
Screen: S13 / S16 / S18 – Retention ≥90% (Broad size availability with high uniformity across selected screens).
Mastering these numbers bridges the gap between your purchasing expectations and the physical beans in your warehouse, giving you total control over quality and consistency.
